How to Install Galaxy Z Fold4 Case with S-Pen Holder

Quick Answer

To install the SUPCASE Unicorn Beetle PRO Rugged Case on your Galaxy Z Fold4, first remove any existing case, then snap the inner silicone layer onto the phone, attach the front frame, and finally secure the outer polycarbonate shell — making sure the S-Pen holder is aligned for easy stylus access.

Step-by-Step Installation Guide

1. Step 1: Prepare Your Phone and Case: Remove any existing case or screen protector. Clean the back and sides of your Galaxy Z Fold4 with a microfiber cloth to remove dust and oils. Lay the SUPCASE Unicorn Beetle PRO face up on a flat surface. Checkpoint: Make sure the inner silicone layer is not twisted or folded before you start.
2. Step 2: Install the Inner Silicone Layer: Hold the silicone layer with the cutouts facing up. Gently push the top of the phone into the silicone, then press the sides and bottom until it snaps into place. Ensure the volume and power buttons align with the silicone openings. Common mistake: Forcing the phone in at an angle can bend the silicone and leave gaps near the hinge.
3. Step 3: Attach the Front Frame: Take the polycarbonate front frame and align it over the top of the phone. Snap it down evenly around the edges, starting from the top and working your way down. Listen for clicks to confirm each corner is secure. Checkpoint: If the frame doesn't click, remove it and check for debris or misalignment.
4. Step 4: Secure the Outer Shell and S-Pen Holder: Slide the outer polycarbonate shell over the back of the phone. Press firmly along the edges until it clicks into the front frame. Insert your S-Pen into the holder to verify it fits snugly but can be removed without excessive force. Common mistake: Overtightening the outer shell can warp the S-Pen holder, making stylus insertion difficult.
5. Step 5: Test the Hinge and Buttons: Fold and unfold your Galaxy Z Fold4 to ensure the case does not obstruct the hinge. Press each button to confirm they click freely. If the hinge feels stiff or buttons are hard to press, remove the case and reseat the layers. Final check: A properly installed case should allow full 180-degree folding without resistance.

Product Facts

• Galaxy Z Fold4 Unicorn Beetle PRO Rugged Case with S-Pen Holder-Metallic Blue: Rugged, dual-layer protection for your Galaxy Z Fold4 The dual-layer design absorbs shock from drops while keeping the phone slim enough to fit in a pocket.

  

• Galaxy Z Fold4 Unicorn Beetle PRO Rugged Case with S-Pen Holder-Metallic Blue: Integrated S-Pen holder for easy access and storage You can keep the S-Pen with the phone at all times, reducing the chance of losing it when you need to jot down notes.