Start with the case you actually own
The Unicorn Beetle PRO in Green Fog is built for the iPhone 14 Pro Max 6.7 inch, and its care routine should match that rugged, protective design. The catalog describes a case made to help shield the phone from drops and impacts while keeping a secure grip, with a Green Fog finish that adds a subtle, stylish look. That combination of a protective shell and a specific color means your maintenance should cover three things: the exterior surface, the buttons and port openings, and the finish itself.
The supplied product information does not include manufacturer cleaning instructions, so the routine below is general, conservative care advice rather than a branded procedure. Treat it as a starting point, and stop if any step seems to stress the case.
What the catalog confirms about this case
- iPhone 14 Pro Max 6.7 inch Unicorn Beetle PRO Rugged Case-Green Fog: Compatible with iPhone 14 Pro Max 6.7 inch Confirming the exact model matters before you clean or remove the case, because a case that is not seated correctly can collect debris around the edges.

iPhone 14 Pro Max 6.7 inch Unicorn Beetle PRO Rugged Case-Green Fog - iPhone 14 Pro Max 6.7 inch Unicorn Beetle PRO Rugged Case-Green Fog: Rugged protective design for everyday durability This tells you the case is intended for daily protection, so your care routine should focus on keeping the shell and openings free of grit that could interfere with the fit.
- iPhone 14 Pro Max 6.7 inch Unicorn Beetle PRO Rugged Case-Green Fog: Green Fog color adds a subtle, stylish look The finish is part of what you are maintaining, so color care deserves its own attention rather than being treated as an afterthought.
- iPhone 14 Pro Max 6.7 inch Unicorn Beetle PRO Rugged Case-Green Fog: Built for a secure fit and easy access to ports and buttons Ports and buttons are designed to be reachable, which means they are also the places where dust and lint tend to gather.
A simple cleaning routine for the Green Fog finish
Because the catalog does not supply a cleaning method, keep each step mild and check the case as you go.
- Remove the case before cleaning: Take the case off the iPhone 14 Pro Max so you can reach the edges and the inside surface without trapping moisture against the phone.
- Wipe the exterior with a soft, slightly damp cloth: Use a gentle cloth rather than an abrasive pad. The goal is to lift everyday grime from the Green Fog surface without scrubbing the finish.
- Clean around the button and port openings: The catalog notes easy access to ports and buttons, so pay attention to those cutouts. A soft dry brush or a dry cloth corner can help remove loose dust.
- Dry completely before reinstalling: Let the case air-dry fully. Reinstalling a damp case can trap moisture, and the supplied information does not confirm that the case is water-resistant.
Button and port upkeep that protects the fit
The case is built for a secure fit and easy access to ports and buttons, and that is exactly where small problems start. These checks are about keeping the openings clear, not about adjusting the case beyond what the catalog describes.
- Check the button covers for grit: Dust and lint can collect around button areas. A dry, soft brush is a gentle way to clear them without forcing anything into the opening.
- Inspect the port cutouts: Look for debris around the charging port and speaker openings. Clearing loose material helps keep the easy-access design working as intended.
- Reinstall and check the fit: After cleaning, seat the case fully and confirm the buttons and ports still line up. If the case does not sit properly, remove it and check for anything trapped underneath.
Color care for the Green Fog finish
The Green Fog color is described as a subtle, stylish look, and the supplied information does not include specific colorfastness or UV-resistance claims. The practical approach is to reduce avoidable wear rather than assume the finish is indestructible.
- Avoid harsh cleaners: Since no cleaning agents are specified, stick to mild methods. Abrasive or strong chemical cleaners are a risk you do not need to take with a colored finish.
- Wipe spills promptly: A quick wipe with a soft damp cloth is gentler than letting a substance sit on the surface.
- Store it reasonably: When the case is off the phone, keep it away from sharp objects and prolonged direct sun. The catalog does not confirm UV resistance, so this is a sensible precaution rather than a manufacturer instruction.
What the supplied information does not cover
The catalog does not include care instructions, safety guidance, or confirmed water, chemical, or UV resistance for this case. It also does not describe a disassembly procedure beyond removing the case from the phone. If you need a manufacturer-approved cleaning method, check the documentation that came with the case or contact SUPCASE support directly.
For everyday use, the routine above keeps the Unicorn Beetle PRO in Green Fog clean, its buttons and ports clear, and its finish cared for without relying on claims the catalog does not make.

